Please log in
You must be logged in to use matchmaking
Manage stand orders
Select Option
Frigel Firenze S.p.A.
Via Pisana, 316,
50018
Scandicci (FI)
Italy
Italy
Location
Hall map
Fairground map
Contact
Please log in for matchmaking
Registration is required to use the networking service and a separate registration for matchmaking. Please register for Matchmaking first.
Let's get started!
Welcome to Matchmaking. Would you like to get in touch with ?
Our range of products
Product categories
- 10 Casting machines and pouring equipment
- 10.03 Peripheral equipment and auxiliary materials for die casting (die casting dies see 17.03.01)
- 10.03.02 Die heater/-cooler units and accessories
Die heater/-cooler units and accessories
- 17 Pattern and die making
- 17.02 Pattern and die making materials and standard elements
- 17.02.05 Heating and cooling devices for moulding and castings tools
Heating and cooling devices for moulding and castings tools
- Greencasting - Multi-zone temperature control unit dedicated to temperature regulation in die casting molds
- GreenShell - Temperature control unit with PLC control for the mould cooling in the low pressure/shell casting applications.
- Ecodry Adiabatic Cooling - THE REPLACEMENT OF THE EVAPORATIVE COOLING TOWER
- RCM - RCD
- RCX
- 18 Control systems
- 18.02 Control equipment, automation technology
Control equipment, automation technology
Our products
Product category: Heating and cooling devices for moulding and castings tools
Greencasting - Multi-zone temperature control unit dedicated to temperature regulation in die casting molds
Die-casting temperature control units Greencasting
The new range of innovatory temperature control units of the Greencasting series
gives Green Box a leading role in the world of the aluminium die-casting.
The complete control of the temperature of the die-casting moulds is granted by the
innovative design of the new Greencasting series.
The completely new cooling system (patent pending) reduces to minimum the electrical energy consumption.
The process is completely controlled by a PLC, including a flow test system to check the mould circuits.
Greencasting is innovation
Innovative cooling system
Extremely high operation flexibility
Simple installation
180°C max operating temperature
Immediate commutation between heating and cooling phase
and viceversa
The lowest electrical energy consumption
Flow test
10 way remote distribution manifold
Greencasting is savings
Softened water can be used, but also city water
Negligible use of compressed air
Minimum thermal losses
Minimum number of temperature control units per casting
machine
Minimum quantity of connecting hoses
No compressed air in the piping system
Options
20 way remote distribution manifold
30 way remote distribution manifold
Cooling larger capacities
High temperature flexible hoses
Die-casting products
Green Jet: 35 bar cooling unit for core pins and microchannels (Jetcool)
Green Shell: temperature control unit for the mould cooling in the low pressure/shell casting applications
Stainless steel cooling tanks (with dimensions from mm 1000x1250x880 to 1500x2000x1000 – different dimensions
on request)
The new range of innovatory temperature control units of the Greencasting series
gives Green Box a leading role in the world of the aluminium die-casting.
The complete control of the temperature of the die-casting moulds is granted by the
innovative design of the new Greencasting series.
The completely new cooling system (patent pending) reduces to minimum the electrical energy consumption.
The process is completely controlled by a PLC, including a flow test system to check the mould circuits.
Greencasting is innovation
Innovative cooling system
Extremely high operation flexibility
Simple installation
180°C max operating temperature
Immediate commutation between heating and cooling phase
and viceversa
The lowest electrical energy consumption
Flow test
10 way remote distribution manifold
Greencasting is savings
Softened water can be used, but also city water
Negligible use of compressed air
Minimum thermal losses
Minimum number of temperature control units per casting
machine
Minimum quantity of connecting hoses
No compressed air in the piping system
Options
20 way remote distribution manifold
30 way remote distribution manifold
Cooling larger capacities
High temperature flexible hoses
Die-casting products
Green Jet: 35 bar cooling unit for core pins and microchannels (Jetcool)
Green Shell: temperature control unit for the mould cooling in the low pressure/shell casting applications
Stainless steel cooling tanks (with dimensions from mm 1000x1250x880 to 1500x2000x1000 – different dimensions
on request)
Product category: Die heater/-cooler units and accessories
GreenJet - Temperature control unit which delivers high pressure water jets to cool circuits.
GREENJET
Temperature control unit which delivers high pressure water jets to cool circuits having high pressure drops, like core pins and microchannels .
et cooling temperature control unit Green Jet
Jet cooling temperature control unit which delivers high pressure water jets (35 bar max)
to cool circuits having high pressure drops, like core pins and microchannels .
The jet cooling temperature control unit has 4 independent outlets in order to grant high flexibility and high cooling accuracy.
Main features
High pressure single circuit unit (max pressure 35 bar)
Max cooling capacity 90 kW
Inlet/outlet pressure sensor (values readable on the display)
Inlet/outlet temperature sensor (values readable on the dispay)
Programmable PLC with 4,3″ touchscree
Non-ferrous piping
Softened water can be used , but also city water
4 independent outlets
Two water filters ( 5 micron + 1 micron)
Temperature control unit which delivers high pressure water jets to cool circuits having high pressure drops, like core pins and microchannels .
et cooling temperature control unit Green Jet
Jet cooling temperature control unit which delivers high pressure water jets (35 bar max)
to cool circuits having high pressure drops, like core pins and microchannels .
The jet cooling temperature control unit has 4 independent outlets in order to grant high flexibility and high cooling accuracy.
Main features
High pressure single circuit unit (max pressure 35 bar)
Max cooling capacity 90 kW
Inlet/outlet pressure sensor (values readable on the display)
Inlet/outlet temperature sensor (values readable on the dispay)
Programmable PLC with 4,3″ touchscree
Non-ferrous piping
Softened water can be used , but also city water
4 independent outlets
Two water filters ( 5 micron + 1 micron)
Product category: Heating and cooling devices for moulding and castings tools
GreenShell - Temperature control unit with PLC control for the mould cooling in the low pressure/shell casting applications.
GreenShell - Temperature control unit with PLC control for the mould cooling in the low pressure/shell casting applications.
Shell casting temperature control unit Green Shell
The Green Shell temperature control unit is the ideal solution for the mould cooling in the low pressure/shell casting applications.
The Green Shell is a water unit with maximum operating temperature of 90°C.
The high flow grants a good cooling effect also in moulds having temperature of 400° – 500°C. The pump flow is of 160 litres/minute.
The shell casting temperature control unit is controlled by PLC and the interface with the press is made through digital inlets. The PLC is supplied with Touch Screen display.
It is possible to set the temperature, to store receipts, to read temperatures and pressures.
The temperature controller is supplied with 5 ways manifold, controlled by pneumatic valves.
The manifold must be installed as close as possible to the mould, so that there is one only main delivery pipe between Green Shell and manifold and short hoses with small diameters between manifold and mould.
The Green Shell includes:
– Flow test to check each way to the mould
– Pressurizing test to verify if there is any water loss
– Mould emptying at the end of the production
Main specification
Water circuit in non-ferrous material
Stainless steel pump
Stainless steel tank
Stainless steel brazed-plate heat exchanger
Communication protocol available: CanBus, ModBus
Alarm signal linkable to the press
Double test for the control of the water circuits in the mould
Mould emptying at the end of the production
Shell casting temperature control unit Green Shell
The Green Shell temperature control unit is the ideal solution for the mould cooling in the low pressure/shell casting applications.
The Green Shell is a water unit with maximum operating temperature of 90°C.
The high flow grants a good cooling effect also in moulds having temperature of 400° – 500°C. The pump flow is of 160 litres/minute.
The shell casting temperature control unit is controlled by PLC and the interface with the press is made through digital inlets. The PLC is supplied with Touch Screen display.
It is possible to set the temperature, to store receipts, to read temperatures and pressures.
The temperature controller is supplied with 5 ways manifold, controlled by pneumatic valves.
The manifold must be installed as close as possible to the mould, so that there is one only main delivery pipe between Green Shell and manifold and short hoses with small diameters between manifold and mould.
The Green Shell includes:
– Flow test to check each way to the mould
– Pressurizing test to verify if there is any water loss
– Mould emptying at the end of the production
Main specification
Water circuit in non-ferrous material
Stainless steel pump
Stainless steel tank
Stainless steel brazed-plate heat exchanger
Communication protocol available: CanBus, ModBus
Alarm signal linkable to the press
Double test for the control of the water circuits in the mould
Mould emptying at the end of the production
Product category: Heating and cooling devices for moulding and castings tools
Ecodry Adiabatic Cooling - THE REPLACEMENT OF THE EVAPORATIVE COOLING TOWER
Ecodry Adiabatic Cooling - THE REPLACEMENT OF THE EVAPORATIVE COOLING TOWER
ADVANTAGES
Performance and environmental respect
Guaranteed operation with minimum water consumption and maintenance even in extreme climatic conditions, up to 50 °C (122 ˚F) ambient temperature.
Safe winter operation without glycol down to an ambient temperature of -40 °C (-40 ˚F).
High energy savings of fans in partial load operation.
Compact installation with minimal floor space required between modules.
High reliability with electrical redundancy and built with 100% non-ferrous materials.
FEATURES
Total control
Maximum water temperature to process: 30/35 °C (86/95 ˚F).
Cooling capacity: 50 - 10,000 kW (14 - 2,845 tons).
Water flow to process: 10 - 2,000 m3/hr (45 - 8,805 gpm).
High efficiency adiabatic chamber for air pre-cooling, for operation in ambient temperatures up to 50 °C (122 ˚F).
Drainable configuration to prevent freezing.
Heat exchangers with a wide exchange surface, with copper tubes and aluminum fins with hydrophilic protection.
Axial fans with DC motors, brushless, inverter driven and individually connected.
Modular design with pre-assembled stainless steel connection manifolds.
Stainless steel structure and aluminum access panels.
ADVANTAGES
Performance and environmental respect
Guaranteed operation with minimum water consumption and maintenance even in extreme climatic conditions, up to 50 °C (122 ˚F) ambient temperature.
Safe winter operation without glycol down to an ambient temperature of -40 °C (-40 ˚F).
High energy savings of fans in partial load operation.
Compact installation with minimal floor space required between modules.
High reliability with electrical redundancy and built with 100% non-ferrous materials.
FEATURES
Total control
Maximum water temperature to process: 30/35 °C (86/95 ˚F).
Cooling capacity: 50 - 10,000 kW (14 - 2,845 tons).
Water flow to process: 10 - 2,000 m3/hr (45 - 8,805 gpm).
High efficiency adiabatic chamber for air pre-cooling, for operation in ambient temperatures up to 50 °C (122 ˚F).
Drainable configuration to prevent freezing.
Heat exchangers with a wide exchange surface, with copper tubes and aluminum fins with hydrophilic protection.
Axial fans with DC motors, brushless, inverter driven and individually connected.
Modular design with pre-assembled stainless steel connection manifolds.
Stainless steel structure and aluminum access panels.
Product category: Heating and cooling devices for moulding and castings tools
RCM - RCD
Microgel for injection molding
Single and double zone temperature control units with incorporated water-cooled chiller and booster pumps.
Microgel is a super-compact mold cooling unit specifically designed for “cycle cooling time reduction”. Combines a water cooled chiller with one or two high flow booster pump temperature controllers with heating elements and a free-cooling valve. Digitally-synchronized with the molding machine, allows for researching and recording the best setting of flow rate and temperature for each zone, optimizing product quality with the minimum cycle cooling time.
Single and double zone temperature control units with incorporated water-cooled chiller and booster pumps.
Microgel is a super-compact mold cooling unit specifically designed for “cycle cooling time reduction”. Combines a water cooled chiller with one or two high flow booster pump temperature controllers with heating elements and a free-cooling valve. Digitally-synchronized with the molding machine, allows for researching and recording the best setting of flow rate and temperature for each zone, optimizing product quality with the minimum cycle cooling time.
Product category: Heating and cooling devices for moulding and castings tools
RCX
Microgel for extrusion
Temperature control units with incorporated water-cooled chiller for extrusion line cooling tanks.
Microgel RCX is an ultra-compact cooling unit designed specifically to “reduce cooling times” of pipe and profile lines. Microgel allows total flexibility, thanks to the individual control of the temperature of each cooling bath. Digitally synchronized with the process, it allows to search and store the best bath temperature in order to optimize the quality of the product, with the minimum possible cooling time.
Temperature control units with incorporated water-cooled chiller for extrusion line cooling tanks.
Microgel RCX is an ultra-compact cooling unit designed specifically to “reduce cooling times” of pipe and profile lines. Microgel allows total flexibility, thanks to the individual control of the temperature of each cooling bath. Digitally synchronized with the process, it allows to search and store the best bath temperature in order to optimize the quality of the product, with the minimum possible cooling time.
Product category: Die heater/-cooler units and accessories
Microgel Air Cooled
Single and double zone temperature control units with incorporated air-cooled chiller and booster pumps.
The Microgel RAM and RAD units are compact air cooled chillers, with integrated temperature control features, which are used in various industrial sectors thanks to their wide range of operating temperatures. They are controlled by a microprocessor and fitted with a particular proportional control regulation device which allows the set temperature to be kept perfectly precise and constant.
The Microgel RAM and RAD units are compact air cooled chillers, with integrated temperature control features, which are used in various industrial sectors thanks to their wide range of operating temperatures. They are controlled by a microprocessor and fitted with a particular proportional control regulation device which allows the set temperature to be kept perfectly precise and constant.
Company news
Date
Topic
14 Jan 2019
GreenCasting by Green Box company of Frigel Group
The Frigel group, thanks to the experience acquired in the sector by the Green Box, deals with the aluminum die-casting sector with patented solutions that allow to achieve excellent results in terms of efficiency and sustainability.
The thermoregulation of the mold is made by pressurized water temperature controllers for operation up to 180 ° C specially designed for the aluminum die-casting process which, interconnected with the molding machine, allow complete synchronization of the process obtaining an optimization of the production cycle (improvement of the quality of the molded piece and reduction of cycle time) and a reduction in energy consumption.
The new range of innovatory temperature control units of the Greencasting series gives
Green Box a leading role in the world of the aluminium die-casting .
The complete control of the temperature of the die-casting moulds is granted by the
innovative design of the new Greencasting series.
The completely new cooling system (patented) reduces to minimum the electrical energy
consumption.
The process is completely controlled by a PLC.
The thermoregulation of the mold is made by pressurized water temperature controllers for operation up to 180 ° C specially designed for the aluminum die-casting process which, interconnected with the molding machine, allow complete synchronization of the process obtaining an optimization of the production cycle (improvement of the quality of the molded piece and reduction of cycle time) and a reduction in energy consumption.
The new range of innovatory temperature control units of the Greencasting series gives
Green Box a leading role in the world of the aluminium die-casting .
The complete control of the temperature of the die-casting moulds is granted by the
innovative design of the new Greencasting series.
The completely new cooling system (patented) reduces to minimum the electrical energy
consumption.
The process is completely controlled by a PLC.
About us
Company portrait
About the Frigel Group
Frigel group offers innovative cooling solutions and refrigeration equipment for industrial applications. All Frigel products are conceived and engineered in the headquarters in Florence, Italy with the latest technologies available in the field and then built in four manufacturing facilities around the world. The solutions are design to fit all specific cooling and temperature control requirements in multiple industries, such as plastics, beverage, oil & gas, cogeneration & tri-generation, food, chemical, pharmaceutical, metals, die-casting & furnaces, data centers and others.
In the last 20 years, Frigel has become a market leader in several of these industries introducing a new way of conceiving and making refrigeration, which is called “intelligent process cooling”. Focused on constant innovation, Frigel designs and builds integrated cooling solutions that achieve: unique performance for each specific application and, at the same time, setting new sustainability standards for the industry
Frigel has been the pioneer in introducing the Ecodry System (internationally patented). A close circuit adiabatic cooling system for overall heat dissipation (replacement for old evaporative cooling tower technology). With it’s exclusive “Adiabatic Chamber” design, Ecodry is the most efficient adiabatic cooling system available and has been successfully validated worldwide in more than 8.000 installations and in all weather conditions.
Frigel also manufactures a wide range of products in the field of refrigeration and process temperature control. Such as high efficiency air and water cooled chillers and heat pumps, from portable units up to several large central systems with inverter driven high efficiency screw compressors. All systems are designed to achieve the highest standards of efficiency and respect of environmental norms.
The Frigel group includes manufacturing sites on four continents and integrates the following companies:
Frigel Firenze S.p.A, (Scandicci, Firenze Italy) Headquarter and Sales, Engineering, Service, Production
Frigel custom cooling solutions Srl, (Lomagna, Italy) Marine oil and gas cooling solutions – Sales, Engineering, Service, Production
Frigel North America inc., (Chicago - USA) Sales, Engineering, Service
Frigel Asia Pacific Company ltd, (Bangkok - Thailandia) Sales, Engineering, Service, Production
Frigel Latino America Ltda, (San Paulo - Brasil) Sales, Engineering, Service, Production
Frigel GmbH (Rheinfelden, Germany) – Sales, Engineering, Service
Green Box Srl (Piove di Sacco Padova – Italy) - Sales, Engineering, Service, Production
Frigel Intelligent Cooling Systems (Greater Noida, India, Join Venture with Matsui). New plant
Frigel group offers innovative cooling solutions and refrigeration equipment for industrial applications. All Frigel products are conceived and engineered in the headquarters in Florence, Italy with the latest technologies available in the field and then built in four manufacturing facilities around the world. The solutions are design to fit all specific cooling and temperature control requirements in multiple industries, such as plastics, beverage, oil & gas, cogeneration & tri-generation, food, chemical, pharmaceutical, metals, die-casting & furnaces, data centers and others.
In the last 20 years, Frigel has become a market leader in several of these industries introducing a new way of conceiving and making refrigeration, which is called “intelligent process cooling”. Focused on constant innovation, Frigel designs and builds integrated cooling solutions that achieve: unique performance for each specific application and, at the same time, setting new sustainability standards for the industry
Frigel has been the pioneer in introducing the Ecodry System (internationally patented). A close circuit adiabatic cooling system for overall heat dissipation (replacement for old evaporative cooling tower technology). With it’s exclusive “Adiabatic Chamber” design, Ecodry is the most efficient adiabatic cooling system available and has been successfully validated worldwide in more than 8.000 installations and in all weather conditions.
Frigel also manufactures a wide range of products in the field of refrigeration and process temperature control. Such as high efficiency air and water cooled chillers and heat pumps, from portable units up to several large central systems with inverter driven high efficiency screw compressors. All systems are designed to achieve the highest standards of efficiency and respect of environmental norms.
The Frigel group includes manufacturing sites on four continents and integrates the following companies:
Frigel Firenze S.p.A, (Scandicci, Firenze Italy) Headquarter and Sales, Engineering, Service, Production
Frigel custom cooling solutions Srl, (Lomagna, Italy) Marine oil and gas cooling solutions – Sales, Engineering, Service, Production
Frigel North America inc., (Chicago - USA) Sales, Engineering, Service
Frigel Asia Pacific Company ltd, (Bangkok - Thailandia) Sales, Engineering, Service, Production
Frigel Latino America Ltda, (San Paulo - Brasil) Sales, Engineering, Service, Production
Frigel GmbH (Rheinfelden, Germany) – Sales, Engineering, Service
Green Box Srl (Piove di Sacco Padova – Italy) - Sales, Engineering, Service, Production
Frigel Intelligent Cooling Systems (Greater Noida, India, Join Venture with Matsui). New plant
Company data
Sales volume
50-99 Mio US $
Export content
> 75%
Number of employees
100-499
Foundation
1960
Area of business
Moulding auxiliaries