Manage stand orders
Select Option

SALICO

Calle Mahón 6 - 2º. Urbanización Parque Rozas, 28290 LAS ROZAS
Spain
Telephone +34 91 6305692
Fax +34 91 6303670
info.spain@salico.net

Hall map

METEC 2019 hall map (Hall 3): stand D45

Fairground map

METEC 2019 fairground map: Hall 3

Our range of products

Product categories

  • 07  Plant and equipment for shaping of steel
  • 07.12  Strip processing lines
  • 07  Plant and equipment for shaping of steel
  • 07.14  Finishing lines
  • 08  Plant and systems for shaping of non-ferrous metals
  • 08.05  Strip processing lines

Our products

Product category: Strip processing lines, Finishing lines, Strip processing lines

Slitting lines

Surface quality, speed and precision

SALICO slitting lines feature very stiff slitter heads with no axial gaps, shafts perfectly parallel and minimum bending in rotation, which together with the correct definition of the slits back tensioning device, able to supply high and even recoiling tension without marks or scratches on the surface or the edges, are the necessary combination for a world class slitting line.

Our slitting lines cover the whole thickness range from aluminum strip 0.1 mm thick to the heavy gauge 18/20 mm carbon steel strip.

More Less

Product category: Strip processing lines, Finishing lines, Strip processing lines

Cut to length lines

High precision, flatness and productivity for any thickness and quality

The cut to length lines cut an entry mother strip in cross section, forming sheets that are suitably stacked in compact and square packages.

SALICO cut to length lines cover the complete thickness range of strip, starting from 0.1 mm aluminium up to the thickest carbon steel coils, of 25 mm.

SALICO may deliver the complete panoplia of multiroller levelers of different types (4 Hi, 5 Hi, 6 Hi…) and sizes (work roll sizes from 25 to 180 mm), different type of shears (rotary eccentric, rotary drum, flying, mechanical, etc.) and different type of stackers (magnetic, vacuum, combined, bomb door, air floatation, etc.)

As variants within the cut to length lines we have the trapezoidal cut to length lines, typical in the automotive sector, and multiblanking lines, where strip is first leveled, then slit into strands and finally cross cut, resulting in simultaneous stacking of 4 or 5 pieces or blanks.

More Less

Product category: Strip processing lines, Finishing lines, Strip processing lines

Tension leveling lines

Perfectly flat steel and aluminum strip

The main purpose of tension levelling of metal strip is to correct the strip shape by bending the strip around small diameter rolls under the influence of externally applied tension in order to produce elongation, making the shorter strip fibers longer and equal to the longest fibers and therefore achieving flat strip and relieving the residual internal stresses in the process.

SALICO supplies tension levelling lines for metal strip both to Rolling Mills and Service Centers. Metal strips (carbon steel, stainless steel, aluminum and other nonferrous materials) are processed within a thickness range from 0.08 to 6.5 mm, width up to 2,500 mm and speed up to 400 m/min.

More Less