Velco Gesellschaft für Förder-, Spritz- und Silo-Anlagen mbH
Postfach 101346,
42513
Velbert
Haberstr. 40, 42551 Velbert
Germany
Haberstr. 40, 42551 Velbert
Germany
Location
Hall map
Fairground map
Contact
Christian Wolf
Managing Director
Our range of products
Product categories
- 02 Melting shop
- 02.04 Auxiliary melting and melt processing facilities
- 02.04.04 Blowing-in equipment for cupolas
Blowing-in equipment for cupolas
- 02 Melting shop
- 02.04 Auxiliary melting and melt processing facilities
- 02.04.06 Inoculation devices, injection equipment
Inoculation devices, injection equipment
- 03 Refractories technology
- 03.02 Equipment for the lining of melting and pouring equipment
- 03.02.02 Spraying machines for refractory material
Spraying machines for refractory material
- 15 Transportation and storage
- 15.03 Pneumatic conveyors
Pneumatic conveyors
- 15 Transportation and storage
- 15.07 Bunkers, silos and accessories
Bunkers, silos and accessories
- 02 Plant and equipment for iron making
- 02.05 Burden plant, coal injection plant
Burden plant, coal injection plant
- 03 Plant and equipment for steel making
- 03.02 Electric steel production
Electric steel production
- 03 Plant and equipment for steel making
- 03.03 Secondary metallurgy
Secondary metallurgy
- 03 Plant and equipment for steel making
- 03.05 Components, ancillary equipment
Components, ancillary equipment
- 04 Plant and equipment for non-ferrous metal production
- 04.06 Components, ancillary equipment
Components, ancillary equipment
Our products
Product category: Spraying machines for refractory material, Components, ancillary equipment
Rotamat
The gunning machine type "ROTAMAT f" (refractory) is a continuously operating rotor gunning machine with a wide range of capacity and is well-proved in the refractory industry. Wherever great demands are made to the machinery technology with regard to dust-free and low-wear gunning of dry refractory concretes - the "ROTAMAT f" is used.
The gunning machine type „ROTAMAT f“ (refractory) complies with all relevant provisions of the machine directives 2006/42/EG, the low voltage directive 2006/95/EG on electrical equipment and the directive 2004/108/EG on electromagnetic compatibility.
The gunning material to be worked is fed through a hopper and a star-shaped agitator to the rotor. This rotor - fixed-ended between two sealing disks and driven by a rotary-current or compressed-air motor conveys the gunning material by the so-called thin-stream-method to the blow-off socket where it is blown into a hose or pipeline by compressed air.
Before being discharged from the line, the up to now dry or earth-slightly moist gunning material is mixed with water in the nozzle mixing unit.
The device operates with a blowing pressure from 0,5 to 6 bar and is able to transport the gunning material over a distance of up to 200 m.
Furthermore it is possible to operate the total installation by means of a remote control. In connection with the well-known Velco storage and charging systems the whole gunning procedure can be automated at a later stage.
The gunning machine type „ROTAMAT f“ (refractory) complies with all relevant provisions of the machine directives 2006/42/EG, the low voltage directive 2006/95/EG on electrical equipment and the directive 2004/108/EG on electromagnetic compatibility.
The gunning material to be worked is fed through a hopper and a star-shaped agitator to the rotor. This rotor - fixed-ended between two sealing disks and driven by a rotary-current or compressed-air motor conveys the gunning material by the so-called thin-stream-method to the blow-off socket where it is blown into a hose or pipeline by compressed air.
Before being discharged from the line, the up to now dry or earth-slightly moist gunning material is mixed with water in the nozzle mixing unit.
The device operates with a blowing pressure from 0,5 to 6 bar and is able to transport the gunning material over a distance of up to 200 m.
Furthermore it is possible to operate the total installation by means of a remote control. In connection with the well-known Velco storage and charging systems the whole gunning procedure can be automated at a later stage.
Product category: Spraying machines for refractory material, Components, ancillary equipment
RON and NA
For the processing of gunning material with a higher humidity share, so-called plastic materials, Velco has the gunning machine RON and NA in their production program.
The gunning machine RON has a gunning capacity of up to 1,7 m³/h.
The NA machine is suitable for higher gunning capacities (up to 4,5 m³/h).
The gunning machine RON has a gunning capacity of up to 1,7 m³/h.
The NA machine is suitable for higher gunning capacities (up to 4,5 m³/h).
Product category: Components, ancillary equipment, Spraying machines for refractory material
Equipment
Transport unit for VELCO - Rotamat
This new transport unit for the VELCO rotor gunning machine enables a safe displacement of the machine by means of forklift, crane or truck inside or even outside the plant.
The transport unit distinguishes by simple and safe handling. The Rotamat machine is set on the transport unit, easily fixed and soon ready for transport.
The unit is furthermore equipped with a lockable box where the gunning equipment, friction wheels, packing washers and tools can be orderly and safely kept with the machine.
This new transport unit for the VELCO rotor gunning machine enables a safe displacement of the machine by means of forklift, crane or truck inside or even outside the plant.
The transport unit distinguishes by simple and safe handling. The Rotamat machine is set on the transport unit, easily fixed and soon ready for transport.
The unit is furthermore equipped with a lockable box where the gunning equipment, friction wheels, packing washers and tools can be orderly and safely kept with the machine.
Product category: Blowing-in equipment for cupolas, Inoculation devices, injection equipment, Pneumatic conveyors
Injection Installations for Foundries
VELCO Injection Systems for Foundries
Cost efficiency is one of the most important factors today. The injection systems developed and manufactured by VELCO offer economic advantages
when injecting carbon into cupola furnaces instead of using costly batch coke
when FeSi and other additives are dosed added
when foundry residues like filter dust, grinding- and fettling dusts are injected, whereby valuable residues are added to the melt without charging the environment (Fig.1) and high disposal costs are avoided
Within the framework of a BMBF research project VELCO injected Zn-containing filter dusts into the metal melt. Here high-concentrated zinc oxide is produced (Fig.2)
A similar installation is used in an iron foundry for the injection of carbon fines into the melt for their carburization process.
Also for non-iron melting plant the recycling of production residues fines is a practicable method. Depending on the grain sizes and the melt volumes the fines are blown into or onto the melt. Hence, valuable raw materials are recovered from residues.
Cost efficiency is one of the most important factors today. The injection systems developed and manufactured by VELCO offer economic advantages
when injecting carbon into cupola furnaces instead of using costly batch coke
when FeSi and other additives are dosed added
when foundry residues like filter dust, grinding- and fettling dusts are injected, whereby valuable residues are added to the melt without charging the environment (Fig.1) and high disposal costs are avoided
Within the framework of a BMBF research project VELCO injected Zn-containing filter dusts into the metal melt. Here high-concentrated zinc oxide is produced (Fig.2)
A similar installation is used in an iron foundry for the injection of carbon fines into the melt for their carburization process.
Also for non-iron melting plant the recycling of production residues fines is a practicable method. Depending on the grain sizes and the melt volumes the fines are blown into or onto the melt. Hence, valuable raw materials are recovered from residues.
Product category: Burden plant, coal injection plant, Secondary metallurgy
Injection Installations for Steel Plants
VELCO will show its UNIDOS injection system used in electric steel plants for the injection of carbon for foaming slag process as well as for the addition of lime and the injection of different additives for the metallurgical process.
Nowadays, with regard to ecological and economical aspects, it is also used to blow-in filter dust. For materials that flow poorly and agglomerate easily, VELCO offers the UNIDOS-R model which is equipped with a special agitator in the chamber substructure.
UNIDOS is also a sophisticated system used in blast furnace operations, where carbon powder, iron ore, filter dust, Rutilit, Ilmenite and even plastic shredder material are fed into the furnace.
A further field of application is ladle metallurgy. Here, VELCO’s machine system is used among others for the carburization or desulphurization process.
EAFs with EBT can be equipped with an automatic installation for the addition of tap hole filling sand. The exact needed quantity of sand can be given either semi or fully automatically onto the EBT. This procedure reduces the standstill times and the danger of accidents.
In the non-iron industry it is utilized to inject salts, alloys or carbon dust.
For coarser bulk materials or materials with higher humidity, VELCO offers its machine type EKS with mechanical dosing system. All machine types can be provided as multiple dosing devices with several, parallel outlets.
Nowadays, with regard to ecological and economical aspects, it is also used to blow-in filter dust. For materials that flow poorly and agglomerate easily, VELCO offers the UNIDOS-R model which is equipped with a special agitator in the chamber substructure.
UNIDOS is also a sophisticated system used in blast furnace operations, where carbon powder, iron ore, filter dust, Rutilit, Ilmenite and even plastic shredder material are fed into the furnace.
A further field of application is ladle metallurgy. Here, VELCO’s machine system is used among others for the carburization or desulphurization process.
EAFs with EBT can be equipped with an automatic installation for the addition of tap hole filling sand. The exact needed quantity of sand can be given either semi or fully automatically onto the EBT. This procedure reduces the standstill times and the danger of accidents.
In the non-iron industry it is utilized to inject salts, alloys or carbon dust.
For coarser bulk materials or materials with higher humidity, VELCO offers its machine type EKS with mechanical dosing system. All machine types can be provided as multiple dosing devices with several, parallel outlets.
Product category: Components, ancillary equipment, Components, ancillary equipment
Gunning Manipulators for the Refractory Repair
The hot gunning repair of aggregates (converter, ladle, EAF, RH-snorkels etc.) is a cost saving alternative to the shut-down and renewal of the complete lining. This process increases the service life of a furnace considerably and it further results in savings of re-heating energy. Due to the quick repair, the number of circulating aggregates, e.g. ladles, can be reduced, too. Moreover, the accident risk is reduced.
However, melt shops are not identical. VELCO offers the customized solution for each aggregate, being a fix installation, crane-moved or mobile unit.
The market introduction of VELCO’s MobiGUN manipulator (Fig.1) found a lot of interest because this gunning manipulator offers several advantages compared with a fix-installed one.
The latest start-up of a MobiGUN was at an Indian steel plant where several EAFs on same furnace floor. MobiGUN offers an electro-mechanic gunning head which is diesel driven from a telescopic handler with hydraulic boom. MobiGUN can be used for all furnaces, as it is self-moving. All it needs is a hose connection to the water and material supply. Also maintenance of the MobiGUN is more effective as it can be done independently from furnace standstills, at any time of its non-use. Hence, MobiGUN is a cost-saving allrounder.
However, melt shops are not identical. VELCO offers the customized solution for each aggregate, being a fix installation, crane-moved or mobile unit.
The market introduction of VELCO’s MobiGUN manipulator (Fig.1) found a lot of interest because this gunning manipulator offers several advantages compared with a fix-installed one.
The latest start-up of a MobiGUN was at an Indian steel plant where several EAFs on same furnace floor. MobiGUN offers an electro-mechanic gunning head which is diesel driven from a telescopic handler with hydraulic boom. MobiGUN can be used for all furnaces, as it is self-moving. All it needs is a hose connection to the water and material supply. Also maintenance of the MobiGUN is more effective as it can be done independently from furnace standstills, at any time of its non-use. Hence, MobiGUN is a cost-saving allrounder.
Company news
Date
Topic
Download
Jun 13, 2019
RH-Snorkel Gunning Manipulator at Salzgitter Flachstahl GmbH
Salzgitter Flachstahl GmbH make use of a gunning installation manufactured by VELCO GmbH for the refractory maintenance process of the snorkels at their new RH plant. Hereby, SZFG fulfil the increased demands on productivity, occupational health and safety and humane working conditions.
The maintenance of RH snorkels constitutes a necessity for the safe operation of a RH plant. These must be cleaned (deskulled) from slag in regular intervals and afterwards furnished with a protective layer inside and outside by using the gunning technique.
Two snorkel maintenance carriages are used for snorkel cleaning and each is provided with a snorkel deskulling device. The platform of these carriages can be used for manual gunning, too. The snorkel maintenance carriages move on rails and each one is dedicated to one RH plant.
A snorkel service carriage is installed between the snorkel maintenance carriages on the same rails. It can be used for both RH plants. The snorkel service carriage is equipped with a gunning manipulator with 2 lances (1x for inside gunning and 1x for outside gunning) and a gunning machine with two outlets, one each for inside resp. outside gunning.
The feeding of gunning material to the snorkel service carriage is carried out pneumatically by means of a pressure vessel machine and a pipe/hose system. The refilling of gunning machine with material is done automatically and dust-free. A recoupling of any hose is not required. In the first phase of construction the pressure vessel machine is filled by BIG BAGs, in a subsequent phase this can be modified to a silo filling.
The required compressed air, gunning water resp. electrical energy are fed to the snorkel service carriage via hoses resp. drums. A manual coupling is not required.
The operator can either use automatic programmes or may control the maintenance process via a radio remote control (manually).
The maintenance of RH snorkels constitutes a necessity for the safe operation of a RH plant. These must be cleaned (deskulled) from slag in regular intervals and afterwards furnished with a protective layer inside and outside by using the gunning technique.
Two snorkel maintenance carriages are used for snorkel cleaning and each is provided with a snorkel deskulling device. The platform of these carriages can be used for manual gunning, too. The snorkel maintenance carriages move on rails and each one is dedicated to one RH plant.
A snorkel service carriage is installed between the snorkel maintenance carriages on the same rails. It can be used for both RH plants. The snorkel service carriage is equipped with a gunning manipulator with 2 lances (1x for inside gunning and 1x for outside gunning) and a gunning machine with two outlets, one each for inside resp. outside gunning.
The feeding of gunning material to the snorkel service carriage is carried out pneumatically by means of a pressure vessel machine and a pipe/hose system. The refilling of gunning machine with material is done automatically and dust-free. A recoupling of any hose is not required. In the first phase of construction the pressure vessel machine is filled by BIG BAGs, in a subsequent phase this can be modified to a silo filling.
The required compressed air, gunning water resp. electrical energy are fed to the snorkel service carriage via hoses resp. drums. A manual coupling is not required.
The operator can either use automatic programmes or may control the maintenance process via a radio remote control (manually).
About us
Company data
Foundation1971