Sati Group S.p.A.

they are available in two versions:

UNIFLAT: Y abrasion-resistant cover, for the conveying of materials without oil or grease

UNIFLAT OILPLUS: Oil-proof cover and skim to avoid swelling even from the bottom side, suitable for conveying oily materials, especially for the recycling plant and waste disposal, etc.

o decrease the damage to the conveyor belt due to the transport of hot material, we can offer our line of heat resistant belts, where a special cover protects the carcass of your conveyor belt from the high temperatures:
UNICALOR HR1: The UNICALOR HR1 is suitable for conveying hot material, with a maximum operating temperature of 120°C
UNICALOR HR2: The UNICALOR HR2 is suitable for conveying hot material, with a maximum operating temperature of 150°C
UNICALOR HR-OIL: The UNICALOR HR-OIL - is suitable for conveying oily and hot material, with a maximum operating temperature of 130°C and peaks of 150°C (example: asphalt).
UNICALOR HR3: The UNICALOR HR3 - EPDM based cover is suitable for conveying hot material, with a maximum operating temperature of 180° C and peaks of 400°C. Besides a great resistance to the heat, this cover has also a good abrasion resistance (~130mm3).

To avoid or limit cuts and rips to the conveyor belt caused by edgy material, or badly loaded material on the conveyor, the core of the belt is protected by transversal metal wires inserted over the plies and a special rip and abrasion resistant top cover Y. This allows you to defend the heart of your belt and your work. These belts can work on classic diameters of drums. The UNIBREAK is produced in two versions: UNIBREAK - Diameter of the steel wire 1,35mm and pitch of 8,0 mm UNIBREAK F -Diameter of the steel wire 1,35mm and pitch of 3,0 mm The carcass of these conveyor belts is made of a composition of polyester fabrics E in warp and in weft polyamide P, resistant to atmospheric agents such as moisture. This structure ensures a high tensile strength in the longitudinal direction and a transverse high flexibility.