Main content of this page

Anchor links to the different areas of information in this page:

You are here: NEWCAST. News. Topics.

Speed, quality and flexibility in focus

Speed, quality and flexibility in focus

Topic of the month

© Carl Cloos Schweißtechnik GmbH

On the "All in one", all relevant components are positioned on a joint base frame / © Carl Cloos Schweißtechnik GmbH

For more than 20 years now, Rudolf Hörmann GmbH & Co. KG with head office in Buchloe (Bavaria, Germany) has placed its trust in welding technology from CLOOS. Last year the commercial and agricultural construction and power engineering specialists began operating two new CLOOS robot systems. This has enabled the company to considerably accelerate the production process for various components, whilst at the same time to increase quality and flexibility.

Since being established by Rudolf Hörmann in 1960, Rudolf Hörmann GmbH & Co. KG has posted respectable growth. In the early years, the company specialised in the steel construction sector. This was joined over the years by agricultural & commercial building construction and photovoltaics.

About two years ago, Hörmann also included mobile lightweight construction and industrial buildings into the product portfolio, offering users the highest levels of flexibility and mobility. "We support our customers from planning to the turnkey realisation of construction projects", explains Ewald Schunn, Production Manager for Metal Construction at Hörmann. The company now employs more than 600 people in Germany, Austria and Switzerland.

© Carl Cloos Schweißtechnik GmbH

Head office of Rudolf Hörmann GmbH & Co. KG / © Carl Cloos Schweißtechnik GmbH

Successful collaboration
Trusting collaboration over decades binds Hörmann and CLOOS. "The key benefit with CLOOS is that they provide everything from a single source - starting with the robot, then positioner and now power source", Schunn highlights. PG Schweisstechnik in Kirchberg (Germany), CLOOS sales and service partner of many years, assumes the on-site support role.

Hörmann now has more than 30 CLOOS welding machines in use in different production areas. The first robot system from CLOOS for automated welding entered operation at the company in 1989. It was joined by another robot system in 2007. Last year saw the 1990 system replaced by two new CLOOS systems. Now a QIROX compact cell and a QIROX "All in one" compact system assume the welding work of the diverse components. Recently, Hörmann also invested in a large, used robot system for the automated welding of semi-circular arches for mobile buildings.

"All in one" system with two welding stations
Hörmann is now welding mid-sized workpieces on the new QIROX "All in one" system. All relevant components are positioned on a joint base frame. They are fixed on a base plate so that a ne adjustment is not necessary. The heart of the system is the QIROX QRC-350-E welding robot.

The large range of the seven-axis robot both simplifies and speeds up the welding of the partly complex workpieces. While the robot is welding the components on one side, loading or unloading is carried out simultaneously on the other station. The movable counter bearing can be used to adjust the clamping lengths within range 2.5 to 3 metres.

© Carl Cloos Schweißtechnik GmbH

On the "All in one", all relevant components are positioned on a joint base frame / © Carl Cloos Schweißtechnik GmbH

QIROX compact cell for small parts
The QIROX QR-CC-40 compact cell for welding smaller components has a 2-station workpiece positioner with vertical change and vertical rotation. By means of the rotary axis the station is turned from the loading area to the robot within 3 sec. During this procedure, the loading area is protected by a light barrier and an additional lateral safety fence There is a glare shield between the two stations.

The system operator therefore has optimal protection and is able to load a station whilst welding is performed on the other station. All robot and positioner axes are fully synchronised. This provides excellent welding results, reduces the secondary processing times and speeds the entire process run enormously.

© Carl Cloos Schweißtechnik GmbH

The QIRX QRC-350-E welding robot has 7 axes, thereby greatly simplifying welding of components / © Carl Cloos Schweißtechnik GmbH

Maximum production flexibility
As "ready to weld" systems, they are fully pre-installed both electrically and mechanically. They could therefore be integrated into the production process quickly and easily.

The flexible clamping system means the systems can work on a number of different components. Currently 50 to 60 part types for example are being processed by the "All in one" system. 100 to 120 different and constantly changing types are planned for the future.

© Carl Cloos Schweißtechnik GmbH

The compact cell welds small parts in particular / © Carl Cloos Schweißtechnik GmbH

Also, the fixtures can be used flexibly on both systems. "The part change possible between the systems means we can also guarantee our delivery times when one robot is already occupied", explains Schunn. "Before, we had to resort to manual welding in emergencies."

© Carl Cloos Schweißtechnik GmbH

The operator can load one compact cell station whilst welding is performed on the other station on the robot / © Carl Cloos Schweißtechnik GmbH

Offline-programming saves time
The robot system is programmed offline with the RoboPlan software by CLOOS. During production, a new program can be simultaneously produced in RoboPlan. In the software, 3D models are used to set welding and search paths as well as travelling lengths and tools, for which the weld parameters and other functions required by the program are then de ned. The program is then transferred to the robot controller and optimised in the workplace itself.

Quality increase and process reliability
Hörmann is certified to DIN EN 1090 to guarantee the highest of quality standards. Thanks to the new CLOOS systems, Hörmann has been able to raise further still component quality by means of precisely reproducible welding results. The automated welding process guarantees maximum process reliability, something which was not guaranteed before with manual welding.

An additional bene t is that using the QINEO Data Manager (QDM) software by CLOOS enables continual welding data monitoring and documentation of the welding processes.


Editing : Behnam Abbaszadeh


More informations and functions


Logo Source : Carl Cloos Schweißtechnik GmbH